Table of Contents
Advertisement
Boot Device Options, SCSI Device Configuration,
and Advanced Configuration Options. Highlight an
option and press Enter to see a list of possible values.
Select SCSI Device Configuration to see a menu of
the following options for each device on the SCSI
bus: Initiate Sync Negotiation, Maximum Sync
Transfer Rate, Enable Disconnection, Initiate Wide
Negotiation(for 3940AUW only), Send Start Unit
Command, BIOS Multiple LUN Support, and
Include In BIOS Scan. These settings apply to indi-
vidual SCSI devices.
Select Advanced Configuration Options for a menu
that includes these advanced options: Host Adapter
BIOS (Configuration Utility Reserves BIOS Space),
Support Removable Disks as Fixed Disks, and
Extended BIOS Translation for DOS Drives
> 1 GByte.
SCSI Disk Utilities
When you select SCSI Disk Utilities from the
Options menu, a list of installed SCSI devices
appears. When you select a device the Utilities menu
appears, giving you the following two choices:
Format Disk
runs the Adaptec SCSI low-level
—
format utility. Most SCSI devices are preformat-
ted and do not need to be formatted again.
Verify Disk Media—scans the selected device's
media for defects. If bad blocks are found, you are
prompted to reassign them; if you select Yes,
those blocks are no longer used.
8
Operating System Software
Your AHA-340AU/AUW host adapters are sup-
ported by the following: DOS, Windows 3.x, Win-
dows 95, Windows NT, Novell NetWare, OS/2,
Unix, and UnixWare.
Under MS-DOS 5.0 or later, you can install up to
eight hard disk drives (SCSI or non-SCSI) in your
computer without using additional software. Older
versions of DOS support up to two hard disk drives.
AHA-3940AU/AUW Installation Guide
Part Number: 511418-00, Rev. A
Print Spec Number: 496346-00
Current Date: 3/12/97
9
ECN Date:3/10/97
Advertisement
Table of Contents
