Connecting External SCSI Devices
You can connect external Ultra320/160 and Ultra2 SCSI devices
to the 68-pin external LVD/SE SCSI connector. Each external
device will require a 68-pin external LVD SCSI cable.
N
OTE
devices with the newer Ultra320/160 and Ultra2 SCSI devices
on the same SCSI channel of the Adaptec SCSI Card 39320.
Follow these steps to connect your external SCSI devices:
Connect one end of an external SCSI cable to the external
S
1
TEP
Ultra320/160 connector on the Adaptec SCSI Card 39320.
68-pin external
LVD/SE SCSI
connector (Ch B)
Connect the other end of the cable to a SCSI connector on the
S
2
TEP
back of an external device. If you are installing only one external
device, terminate the device and skip to Step 4.
We recommend that you do not combine older SCSI
8
External LVD SCSI
cable
SCSI terminator