Connecting External Scsi Devices - Adaptec 29320-R Installation Manual

Plug the other end of the cable to a terminated Ultra/Fast Narrow
S 3
TEP
SCSI device.
If you have other Ultra/Fast Narrow SCSI devices, attach them to
S 4
TEP
the connectors between the two ends of the cable. Be sure these
other devices are un-terminated.
Connect a power cable from your computer's internal power
S 5
TEP
supply to each internal device.

Connecting External SCSI Devices

You can connect external Ultra320/160 and Ultra2 SCSI devices
to the 68-pin external LVD/SE SCSI connector. Each external
device will require a 68-pin external LVD SCSI cable.
N
OTE
devices with the Ultra320/160 and Ultra2 SCSI devices on the
same SCSI channel of the Adaptec SCSI Card 29320.
Follow these steps to connect your external SCSI devices:
Connect one end of an external SCSI cable to the external
S 1
TEP
Ultra320/160 connector on the Adaptec SCSI Card 29320.
68-pin external
LVD/SE SCSI
connector (Ch B)
We recommend that you do not combine legacy SCSI
8
External LVD SCSI
cable