Connecting External Scsi Devices - Adaptec 39320D-R Manual

Plug the internal Ultra320/160 and Ultra2 SCSI devices to the
S 3
TEP
other cable connectors, starting with the connector at the
terminated end of the cable.
Plug first device
to this connector
N
OTE
from the factory with termination disabled and cannot be
changed. Proper termination is provided by the terminator at
the end of the LVD SCSI cable.
Connect a power cable from your computer's internal power
S 4
TEP
supply to each internal SCSI device.

Connecting External SCSI Devices

You can connect external Ultra320/160 and Ultra2 SCSI devices
to the 68-pin external LVD/VHDCI SCSI connectors. Each
external device will require a 68-pin VHDCI external LVD SCSI
cable.
N
OTE
devices with the newer Ultra320/160 and Ultra2 SCSI devices
on the same SCSI channel of the Adaptec SCSI Card 39320D.
Ultra320/160 or Ultra2
SCSI devices
Built-in terminator on cable
Internal Ultra320/160 and Ultra2 SCSI devices come
We recommend that you do not combine older SCSI
7