Vuly Flare Manual page 15

13
STEP
A. Choose a net pole and find the corresponding strap on
the net, at the very top of this strap there will be a metal
U-shaped hook, attach this into the lower holes at the top
of your Upper Net Pole as seen in figure B and lay the pole
back down against the frame.
B. Repeat this for all of the Net Poles until all of the Net Straps
are connected to the poles.
14
STEP
A. Pick a net pole and lift this up to attach into the T-Joiner,
be sure to check your net strap is not twisted and the heart
shape of the lower net pole lines up with the T-Joiner.
B. Insert it into the T-Joiner, through the holes in the Safety
Padding. Ensure that there is no safety padding in the way
when completing this step.
C. Pull the Net Pole away from the trampoline slightly while
pushing down until this slots fully into place - the groove on
the lower net pole will not be visible once this is inserted
fully.
D. Repeat for each Net Pole until you have completely erected
the Safety Net.
E. Ensure the seam in your netting runs parallel with the Net
Pole.
Remember: Ensure that the Safety Net is correctly
assembled. A properly installed Safety Net is crucial to
protect against injuries.
Remember: Ensure that the Net Poles have
been secured. Check there is no groove visible
on the Lower Net Poles (they are fully inserted)
WARNING: Make sure that all push buttons are locked and secured before using your trampoline.
Bouncing on a trampoline with push buttons that are not locked will cause damage and injury.
CONGRATULATIONS!
You have assembled your Flare trampoline.
A
B
B.
15