Vuly Flare Manual page 13

7
STEP
A. Remove the Springs on either side of the Joiner where your Batch Tags are.
B. Attach these D-Shackles through the eyelets of the net on both sides of the Batch Tag.
C. Re-attach the Springs.
D. Repeat for each Spring and D-shackle to the left and right of every T-Joiner.
8
STEP
Walk around your trampoline and attach all of your D-Shackles through the eyelets in the Safety net.
9
STEP
A. Walk around the trampoline and hang a spring off every
D-Shackle on your Jump Mat.
B. Using the Spring Tool, attach one spring to each Curved Pole
and continue to go around the trampoline attaching one Spring
per section until all of your springs are attached, it is important
to keep the tension of your Jump Mat even during this stage.
C. Ensure that the D-shackles remain slipped through the net
connector holes as you complete this step.
13