Manufacturer's Note, Ce And Warranty - tams elektronik FD-R Basic Manual

Basic
FD-R
Problems with the combined Decoder
§
After programming the FD-R
Basic
FD-R does not react like before.
Possible cause: You have altered values in the function decoder
area of the FD-R
the one of the FD-R
decoder as well. à Set
decoder anew. The settings will be taken over automatically into
the RailCom area of the FD-R
Basic
FD-R will be unchanged.
If you cannot find the problem, please return the decoder for repair
(address on the cover page).

11. Manufacturer's note, CE and warranty

Manufacturer's note
The person who brings the circuit into operation is the manufacturer of
the product. If he sells the product to another person he is responsible
for passing on all the relevant papers.
Certification
This product is developed and tested in accordance with the European
standards EN 55014-1 and EN 61000-6-3. This product conforms with
the EC- directive 2004/108/EG on electromagnetic radiation and is
therefore CE certified.
Conditions of warranty
This product is guaranteed for two years. The warranty includes the
correction of faults which can be proved to be due to material failure or
factory flaw. We guarantee the adherence to the technical
specifications of the circuit when assembled and connected according to
the manual.
Basic
Basic
. As the other decoder´s address is the same as
Basic
, the changes were taken over for the
RailCom to "on" and programm the
Basic
the decoder combined with the
, the function decoder area of the
English
Page 57