Table of Contents
Advertisement
Basic
FD-R
Name of CVs /
Registers
Flashing
frequency of
the lighting
Examples for the flashin frequency:
CV#112 = 10 à 2 Hz / CV#112 = 48 à 0,7 Hz
CV#112 = 100 à 0,25 Hz / CV#112 = 255 à 0,125 Hz
2nd Motorola
address
10. Operation with RailCom
Requirements
For reading out the data via RailCom, special detectors and boosters
compatible with RailCom are required.
It is not possible to read out data via RailCom unless the CV#29 (DCC
format) or the register #07 (Motorola format) of the FD-R
switched on.
RailCom-Messages can only be transferred in model railway layouts with
a DCC signal on the rails. When the FD-R
with a Motorola decoder, RailCom messages cannot be sent unless
simultaneuously at least one other locomotive or function decoder is
controlled in DCC-Format.
CV-
Reg.
Input value
no.
no.
(Default)
112 38
10 ... 255
(48)
114 40
1 ... 255
(4)
Remarks and Tips
Settings common for all
lighting.
10 à highest frequency
255à lowest frequency
= Address needed to switch
additional functions in
Motorola format. The
function keys F5 to F8 are
reached via the function keys
F1 to F4, the function key F9
via the function key F0.
Basic
is operated in combination
English
Basic
RailCom is
Page 53
Advertisement
Table of Contents
