Removing And Installing The Processor Air Duct; Removing The Processor Air Duct - Acer Altos R710 Service Manual

Removing and Installing the Processor Air Duct

Always operate your server chassis with the processor air duct in place. The air duct is required for proper
airflow within the chassis.
For instructions on adding or replaceing a processor, first remove the processor air duct and the processor air
dam, and then see your server board User Guide for instructions on processor installations and removals.
Return to these instructions to reinstall the processor air dam and processor air duct after installing your
processor and heat sink.

Removing the Processor Air Duct

1. Remove the chassis cover. For instructions, see "Removing the Chassis Cover."
2. Lift the processor air duct from its location over the two processor sockets.
67 Chapter 3