Configuration Jumpers - Acer Altos R710 Service Manual

Configuration Jumpers

Configuration Jumper
Jumper Name
Password Clear 1-2
(line"A" in figure
2-3
above)
1-2
Recovery Boot
2-3
(line"B" in figure
above)
CMOS Clear (line 1-2
"C" in figure
2-3
above)
Chapter 5
Pins
These pins should be jumpered for normal system operation.
If these pins are jumpered, administrator and user passwords will be cleared on
the next reset. These pins houls not be jumpered for normal operation.
These pins should be jumpered for normal system operation.
If these pins are jumpered, the system will attempt to recover the BIOS by
loading the BIOS code into the flash device from a floppy disk. This jumper is
typically used when the BIOS has become corrupted. These pins should not be
jumpered for normal operation.
These pins should be jumpered for normal system operation.
If these pins are jumpered, the CMOS settings will be cleared on the next reset.
These pins should not be jumpered for normal operation.
What happen at system reset...?
110