Removing And Installing The Air Duct - Acer AR320 F1 Series User Manual

8 Position the ODD bracket (3) and tighten the screw (4) to secure
the bracket in place.
9 Connect the power and data cable (5) to the new optical drive.

Removing and installing the air duct

Caution! Always operate your server with the air duct installed to
ensure reliable and continued operation.
You need to remove the air duct to perform the following procedures:
• Removing and installing a processor.
• Removing and installing a memory module.
Removing the air duct
1 Observe the ESD precautions described on page 22.
2 Perform the pre-installation instructions described on page 22.
3 Remove the top cover. See page 29.
4 Lift the air duct from the chassis.
31