Pci Configuration; Memory Configuration - Acer Altos R710 Service Manual

PCI Configuration Sub-menu Selections
Feature

PCI Configuration

Onboard Video
Dual Monitor Video
Onboard NIC 1 (Left)
On board NIC 1 ROM
Onboard NIC 2 (Right)
On board NIC 2 ROM
Onboard SCSI
Onboard SCSI ROM
Onboard SCSI Mode
Slot 1 Option ROM
Slot 2 Option ROM
Slot 3 Option ROM
Slot 4 Option ROM
Slot 5 Option ROM
Slot 6 Option ROM
Memory Configuration Sub-menu
This sub-menu provides information about the DIMMs detected by the BIOS. The DIMM number is printed on
the baseboard next to each device.
Chapter 2
Options
Disabled/ Enable/Disable on board VGA
Enabled Controller
Disabled/ Select which graphics
Enabled controller to use as the
primary boot device. Enabled
selects the on board device.
Disabled/
Enabled
Disabled/
Enabled
Disabled/
Enabled
Disabled/
Enabled
Disabled/
Enabled
Disabled/
Enabled
IM/IME IM/IME = Integrated Mirroring/
Integrated Mirroring
IS
Enhanced
IS = Integrated Striping
Before changing modes, back
up array data and delete
existing arrays, if any.
Otherwise, loss of all data
may occur.
PCI-X 64/133
PCI-X 64/133
PCI-X 64/133
PCI-X 64/133
PCI-X 64/133
PCI-X 64/133
Help Text
Grayed out of Onboard
Video is set to "Disabled"
Grayed out if device is
disabled.
Grayed out if device is
disabled.
Grayed out if device is
disabled.
After OS installation with a
selected SCSI RAID
mode, only change this
mode selection if
prepared to rebuild RAID
array. Changing the mode
could damage current OS
installation on RAID
volume.
Grayed out if device is
disabled.
Visable only when
installed riser supports
this slot.
Visable only when
installed riser supports
this slot.
Visable only when
installed riser supports
this slot.
Visable only when
installed riser supports
this slot.
Description
44