Table of Contents
Advertisement
Setting and changing the password
To set or change an Administrator/User password:
1
Enable the Administrator Password or User Password parameter in
the System Security menu by pressing the Up or Down arrow key
to select Present. The corresponding password window appears:
Administrator Password window
User Password window
2
Type a password then press Enter. The password may consist of up
to seven alphanumeric characters.
Note: Be careful when typing your password because the actual
characters do not appear on the screen; password characters
appear as asterisks (*).
3
Retype the password to verify your first entry then press Enter.
4
Highlight the Set or Change Password option then press Enter.
5
Press Esc to return to the System Security screen.
6
Press Esc to exit Setup. The Exit Setup screen appears.
79
Advertisement
Table of Contents
