Table of Contents
Advertisement
[Network information]
1)
Press as to select [Network].
2)
Press the <ENTER> button.
f The [Network] screen is displayed and then confirm the following items.
[MAC address]
[IP address]
[SSID] *
1
[Wireless IP] *
1
*1 It will be displayed when the wireless module (Model No.: ET-WML100) of the optional accessories is inserted.
[Remote control]
This switching function prevents remote control interference when operating several projectors or video equipment at the same
time.
1)
Press as to select [Remote control].
2)
Press the <ENTER> button.
f The [Remote control] screen is displayed.
3)
Press as to select one item.
f This projector provides seven different remote control codes: [ALL], [Code 1]~[Code 6].
[ALL]
[Code 1] - [Code 6] Select when specifying an ID number to control individual projector.
4)
Press the <ENTER> button.
f [Remote control] is set.
Note
f To specify an ID number for individual control, the ID number of a remote control must match the ID number of the projector.
f When the ID number is set to [ALL], the projector will operate regardless of the ID number specified by remote control. If
multiple projectors are set up side by side with ID set to [ALL], they cannot be controlled separately from the projectors with
other ID numbers.
f Refer to "Setting the remote control ID numbers" (x page 42) for how to set the ID number on the remote control.
[Factory default]
Return various setting values to their factory default settings.
1)
Press as to select [Factory default].
2)
Press the <ENTER> button.
f The [Return to Factory default?] screen is displayed.
3)
Press as to select [Yes] and then press the <ENTER> button.
f The [OK?] screen is displayed.
4)
Press as to select [Yes] and then press the <ENTER> button.
f The [Please wait] message will appear, and resetting operation will start, and after completing the operation, the
[Please wait] message will disappear.
Attention
f After executing the [Factory default], be sure to turn off the projector (x page 34), disconnect the power plug from the wall
outlet, and then turn on the projector in order to reflect the initial setting values.
Note
f The PIN code, logo PIN code, [Logo select] setting, user logo, lamp usage time and filter usage time will not return to the
factory default settings even if [Factory default] is executed.
Chapter 4 Settings - [Expand] menu
Displays the MAC address of this projector.
Displays the current IP address of this projector.
Displays the SSID character string of the projector while the Wireless LAN is connected.
Displays the IP address of the wireless module which is inserted into the projector while the
wireless LAN is connected.
Select when controlling projectors without specifying an ID number.
ENGLISH - 69
Advertisement
Table of Contents
