Name And Function Of Parts; Remote Control - Panasonic PT-D7500U Operating Instructions Manual

Name and function of parts

Remote control

< When the operation mode selector
set to Projector >
Remote control operation indicator lamp
The lamp flashes when any remote control button
is pressed.
POWER ON button (page 39)
Turns on the power if the MAIN POWER has been
put to the "l" position.
POWER OFF button (page 40)
Turns off the power if the MAIN POWER has been
put to the "l" position.
AUTO SET UP button (page 43)
Pressing this button while projecting an image
automatically corrects the picture positioning on
the screen. While the auto setup feature is active,
a message"AUTO SETUP" appears on the screen.
Input selector (RGB1, RGB2, AUX, VIDEO, S-
VIDEO) button
Use to toggle through the RGB1, RGB2, AUX
(module input), VIDEO and S-VIDEO input ports.
SYSTEM SELECTOR button (page 67)
System switching can be done.
MENU button (page 50)
Displays and clears the Main Menu. It can also
return to the previous screen when the menu is
displayed.
FREEZE button (page 48)
Press this button to freeze the image temporarily.
Arrow
Use these buttons to select an item on the menu
screen, change setting and adjust the level.
ENTER button (page 50)
Press this button to enter your menu selection or to
run function.
Standard (STD) button (page 50)
Press this button to restore the default factory setting.
ON SCREEN button (page 49)
This button turns on and off the on-screen
indication function.
10
buttons (page 50)
POWER
ON OFF
AUTO
SETUP
RGB RGB
AUX
1 2
SHUTTER
S-
VIDEO VIDEO SHUT
MENU FREEZE
PAGE UP
ENTER
PAGE DOWN
ON SCREEN
1 2 3 SYSTEM
STD OSD
SEL
D.ZOOM
FUNC
4 5 6
1
BRIGHT CONTRAST
7 8 9
LENS
0
NEXT ASPECT USER
LIGHT ID SET
ID ALL
LASER ON/OFF
Computer
Projector
Numetric
is
SHUTTER button (page 48)
Press this button to black out the image
temporarily.
Function 1 (FUNC1) button (page 75)
This button can control the functions set in
"FUNC1" of the "Option" screen from Main Menu.
Digital Zoom (- D.ZOOM +) buttons (page 48)
Any portion of the picture can be zoomed in.
LENS button (page 41)
Switches to the mode of projection lens
adjustment.
BRIGHT button (page 52)
Switches to the mode of black level adjustment.
CONTRAST button (page 52)
Switches to the mode of image contrast
adjustment.
NEXT button
When multiple signal selectors are connected to
the main unit in the system, this button specifies
the second signal selector or beyond. With the ID
set button pressed, every press on the button will
change the value in the ten's place.
ASPECT button
Switches the image aspect ratio to 4:3, 16:9.