Table of Contents
Advertisement
Chapter 3 Basic Operations - Basic operations by using the remote control
Using the digital zoom function
(Only for still image-based signals input)
You can enlarge the center of the projected image. You can also change the location of the area to be enlarged.
buttons
1)
Press the <D.ZOOM +> or < D.ZOOM -> button on the remote control.
f The [D. zoom] individual adjustment screen is displayed.
f Press asqw on the remote control to move the display position after enlargement.
Operation
Press the <D.ZOOM +> button.
Press the <D.ZOOM -> button.
Press the as buttons after enlargement.
Press the qw buttons after enlargement.
Note
f When the input signals change during digital zoom, the enlargement display of the digital zoom will be cancelled.
Controlling the volume of the speaker
You can adjust the volume of the audio output from the build-in speaker or the <VARIABLE AUDIO OUT> terminal.
buttons
1)
Press the <VOLUME +> or <VOLUME -> button on the remote control.
<VOLUME +>
<VOLUME ->
Switching the image mode
This function allows you to switch the image mode.
button
1)
Press the <IMAGE> button on the remote control.
f It will switch each time you press the button, [Dynamic] → [Standard] →[Cinema] → [Blackboard(Green)] →
[Colorboard] → [User image] → [Dynamic] →....
Note
f For details, please refer to the [Color adjust] menu → [Image mode] (x page 51).
Using the mute function
The audio from the built-in speaker or <VARIABLE AUDIO OUT> terminal will be turned off temporarily.
button
1)
Press the <MUTE> button on the remote control.
f The audio turns off.
2)
Press the <MUTE> button again.
f The audio turns on.
Increases magnification.
Decreases magnification.
Moves the area to the top or the bottom.
Moves the area to the left or the right.
Increases the volume.
Decreases the volume.
Adjustment
Adjustment range
0 ~ 33
--
ENGLISH - 41
Advertisement
Table of Contents
