Table of Contents
Advertisement
Connecting example : Computers
Computer
Audio equipment
Attention
f When connecting the projector to a computer or an external device, use the power cord supplied with each device and
commercially available shielded cables.
Note
f For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to
HDMI standards is used, images may be interrupted or may not be projected.
f If you operate the projector using the computer with the resume feature (last memory), you may have to reset the resume
feature to operate the projector.
f When the <VARIABLE AUDIO OUT> terminal is connected with cable, the sound will not be output from the built-in speaker.
f Attach the optional wireless module (Model No.: ET-WML100) or USB memory directly to the <USB A (VIEWER/
WIRELESS)> terminal of this projector without using a USB extension cable or USB hub.
f If the video signal from the DVI-D terminal of the external device (such as a computer) is connected to the <HDMI IN>
terminal by using a conversion cable, you need to set the [Setting] menu → [HDMI setup] → [Sound] to [Computer]
(x page 57) and input the audio signal to the <AUDIO IN 1> terminal.
30 - ENGLISH
Chapter 2 Getting Started - Connecting
Computer
Control computer
Computer
Computer
USB memory /
Wireless module
(Model No.: ET-WML100)
Control computer
Computer
Advertisement
Table of Contents
