Wps; Advanced Settings - ZyXEL Communications VMG9827-B50A User Manual

7.4 WPS

WPS allows you to quickly set up a wireless network with strong security, without having to configure
security settings manually. Set up each WPS connection between two devices. Both devices must
support WPS. See
Note: The
VMG
7.2.1 on page
WPS in the Network Setting > Wireless > Advanced screen.
Click Network Setting > Wireless > WPS. The following screen displays.
Figure 42 Network Setting > Wireless > WPS
The following table describes the labels in this screen.
Table 22 Network Setting > Wireless > WPS
LABEL
Connection Type
Wi-Fi Name
WPS

7.5 Advanced Settings

Use this screen to configure advanced wireless settings. Click Network Setting > Wireless > Advanced.
The screen appears as shown.
See Section 7.8.2 on page 107
Chapter 7 Wireless
Section 7.8.8.2 on page 111
applies the security settings of the main 2.4G or 5G wireless profile (see
94). If you want to use the WPS feature, make sure you have enabled
DESCRIPTION
This field indicates whether you will apply WPS to the 2.4G or 5G wireless network.
This field displays the wireless network name.
Click the Connect button to add another WPS-enabled wireless device (within wireless range of
the VMG) to the wireless network. This button may either be a physical button on the outside of
device, or a menu button similar to the WPS button on this screen.
Note: You must press the other wireless device's WPS button within two minutes of
pressing this button.
for detailed definitions of the terms listed in this screen.
VMG4927-B50A / VMG9827-B50A / VMG3927-B50B User's Guide
for more information about WPS.
98
Section