Mesh - ZyXEL Communications VMG9827-B50A User Manual

Table of Contents

Advertisement

7.7 MESH

Use this screen to enable or disable Zyxel MESH (Multy Pro). It supports AP steering and Band steering. AP
steering allows wireless clients to roam seamlessly between Multy-Pro-supported devices in your MESH
network by using the same SSID and WiFi password. Also, AP steering helps monitor wireless clients and
drop their connections to optimize the VMG bandwidth when the clients are idle or have a low signal.
When a wireless client is dropped, it has the opportunity to steer to a Multy-Pro-supported device with a
strong signal. Band steering allows dual band wireless clients to steer from one band to another.
A MESH network consists of a controller, the VMG, and a maximum of three Multy-Pro-supported
extenders.
When Multy Pro is enabled:
• One Connect will be enabled and grayed out automatically. It's used for the communication
between the VMG and a Multy-Pro-supported extenders for the setup of a MESH network.
• The SSID and WiFi password of the main 2.4G wireless network will be copied to the main 5G wireless
network.
See the steps below on how to set up a MESH network with the VMG. The setup could take you 30
minutes.
Configurations on a Multy-Pro-Supported Extender(s)
Prepare a Multy-Pro-supported extender(s) from Zyxel.
1
The following table lists the Multy-Pro-supported extenders from Zyxel at the time of writing.
Table 24 Multy-Pro-Supported Extenders from Zyxel
MODELS
WAP6804
WAP6906
WAP7205
If the Multy-Pro-supported extender is in repeater mode, enable WiFi. See your Multy-Pro-supported
2
extender's UG for how to enable WiFi.
If the Multy-Pro-supported extender is in AP mode, connect it to the VMG using an Ethernet cable.
3
Turn on the Multy-Pro-supported extender.
4
Enable Zyxel MESH in the Web Configurator. See your Multy-Pro-supported extender's UG for how to
5
enable Zyxel MESH.
Configurations on the VMG
If the Multy-Pro-supported extender is in repeater mode, enable WiFi. See
1
Section 3.2 on page 39
Enable Zyxel MESH in the Network > Wireless > MESH screen.
2
Chapter 7 Wireless
for more information on enabling WiFi.
VMG4927-B50A / VMG9827-B50A / VMG3927-B50B User's Guide
103
Section 7.2.1 on page 94
or

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vmg4927-b50aVmg3927-b50b

Table of Contents