Bushnell Stableview 18-1035 Quick Reference Manual page 13

HOW TO USE THE HANDSTRAP
The binoculars can be more securely held when
you slip your hand through the handstrap.
Slip your hand through the handstrap and adjust
the belt length.
To tighten the strap, pull the belt on the eyepiece
end.
To loosen the strap, lift the buckle on the backside
of the handstrap and pull on the belt.
WARNING
The handstrap also serves as the battery holder. Do NOT apply
strong force or remove the strap from the binoculars. Damage
could result.
INSTALLING THE NECKSTRAP
1) Make a large loop at each end of the neckstrap
2) Insert strap through neckstrap bracket
3) Lead the strap inside the loop and through the buckle and pull
tight. Do the same with the outer loop.
4) Do the same with the opening in the binoculars to attach the
strap on the other side.
7