Throttle Trigger And Throttle Lock - Husqvarna K770 Workshop Manual

3. Open the hose clip with a screwdriver.
The hose clip can be used again.
6.15.3 To assemble the wet system
1. Put the spray nozzles on to the blade guard.
2. To put the filter in the connector, press it in on a flat
surface.
651 - 001 - 27.06.2018
3. Close the hose clip with a pair of pliers.

6.16 Throttle trigger and throttle lock

6.16.1 To remove the throttle trigger and throttle
lock
Note: When you remove the throttle lock, use a v-jaw
tongue-and-groove pliers. Make sure that the jaws of the
pliers are as close as possible to the handle. Put a cloth
on the throttle lock before you apply the pliers to prevent
damage to the surface.
Repair and servicing - 61