Husqvarna K770 Workshop Manual page 17

5.2.5 To remove the carburetor
1. Remove the screw.
2. Lift the carburetor until you can access the gasoline
hose and the hose to the air purge bulb.
3. Remove the gasoline hose from the carburetor.
651 - 001 - 27.06.2018
4. Remove the hose to the air purge bulb.
5. Remove the throttle rod from the throttle control.
5.2.6 To remove the air duct
Remove the starter, air filter cover and cylinder cover
before you remove the air duct.
1. Lift the cable for the stop switch out of its holders.
2. Remove the ignition cable at the spark plug and lift
the cable out of its holder in the cover.
Product overview for repair and
servicing - 17