To Assemble The Cylinder - Husqvarna K770 Workshop Manual

3. Install a circlip in the piston.
4. Hold the piston in position, push in the wrist pin and
install the other circlip.
46 - Repair and servicing

6.11 To assemble the cylinder

Clean off remaining bits of the first gasket from the
surfaces that connect with the gasket.
1. Put the gasket on the cylinder.
2. Make sure that the opening on the piston rings
aligns with the guide pin.
3. Press the piston rings together using the piston ring
compressor.
651 - 001 - 27.06.2018