Mac Filter - TP-Link TL-WPA8730 User Manual

Chapter 3
Done!
3 10

MAC Filter

This function exploits the uniqueness of the MAC (Medium Access Control) address,
a unique 12-digit hexadecimal address (for example, D8-5D-4C-B4-46-EA) of every
network device, to determine if the device can or cannot access your wireless network.
I want to:
How can I
do that?
and the default password is 12345670. You can change the
default ones by directly entering new ones in the field. SSID is
up to 32 characters, and the value in both SSID and password is
case-sensitive.
Now you can tell your guests to connect to the guest network
you created.
Prevent unauthorized users from accessing my wireless network
by utilizing the network device's MAC address.
For example, I have a computer that is connected to my wireless
network. Now, an unknown device (an intruder) is also using my
wireless network, which affects my Internet speed. I would like
to control my wireless network with the following capabilities:
• My computer is always allowed to access the wireless network.
• The unknown device is not allowed to access the wireless
network.
• I don't have to keep changing my wireless password as often.
1 Connect to the powerline extender wirelessly. Visit
tplinkplc.net, and log in with the password you set for the
extender.
2 Go to Wireless> MAC
3 Toggle On to enable MAC Filter.
4 Select either of the filtering rules and click Save. Here we
select Block wireless access from the devices listed below
and then click Save.
Configuring via Web Management Interface
Filter.
http://
26