Mac Filter - TP-Link TL-WPA7817 User Manual

Chapter 3 Configuring via Web Management Interface
4 Select 2.4GHz or 5GHz and configure the following settings.
To enable or disable the guest network function:
Select the box 2.4GHz or 5GHz to enable the guest network function. Deselect the
box to disable guest network function. If disabled, all guest network settings of the
corresponding band will be ineffective.
To change the guest network name (SSID) and password:
The default SSIDs are TP-Link_Guest_XXXX and TP-Link_Guest_XXXX_5G, and the
default password is printed on the product label. You can change the default ones by
directly entering new ones in the field. SSID is up to 32 characters, and the value in both
SSID and password is case-sensitive.
Done!
Now you can tell your guests to connect to the guest network you created.
3 10

MAC Filter

This function exploits the uniqueness of the MAC (Medium Access Control) address,
a unique 12-digit hexadecimal address (for example, D8-5D-4C-B4-46-EA) of every
network device, to determine if the device can or cannot access your wireless network.
I want to:
Prevent unauthorized users from accessing my wireless network by utilizing the network
device's MAC address.
For example, I have a computer that is connected to my wireless network. Now, an
unknown device (an intruder) is also using my wireless network, which affects my
internet speed. I would like to control my wireless network with the following capabilities:
• My computer is always allowed to access the wireless network.
• The unknown device is not allowed to access the wireless network.
• I don't have to keep changing my wireless password as often.
How can I do that?
24