Advertisement
Quick Links
TL-WPA8630 KIT
Hello, I'm here.
Follow me to extend your Wi-Fi network.
Internet
WAN
LAN
Connect the adapter to a LAN
1
port of your router using an
Ethernet cable.
Plug the powerline devices into the wall sockets
2
near each other and on the same electrical circuit.
Powerline
Adapter TL-PA8010P
* Image may differ from
actual product.
Pair the powerline devices.
A.
Press the Pair button for 1 second.
The Power LED
starts blinking.
* If the Power LED does not blink, press it again.
Extender TL-WPA8630
B.
Press the Pair button for 1 second.
The Power LED
starts blinking.
When the Powerline LED
is on
and stable, it's done.
Tips:
You can add more powerline devices to the
existing powerline network by pairing these
devices.
Advertisement
Related Manuals for TP-Link WPA8630K
Summary of Contents for TP-Link WPA8630K
- Page 1 TL-WPA8630 KIT Plug the powerline devices into the wall sockets near each other and on the same electrical circuit. Hello, I’m here. Follow me to extend your Wi-Fi network. Powerline Adapter TL-PA8010P Extender TL-WPA8630 * Image may differ from actual product. Internet Connect the adapter to a LAN Pair the powerline devices.
- Page 2 Press for 5 seconds until all LEDs are off and then on again to reset wireless settings at the same time. If it fails to copy both, your www.tp-link.com. router may be only able to clone one band at a time. Please the powerline extender to the factory defaults.