TP-Link TL-WPA8730 User Manual page 9

Chapter 1 Get to Know About Your Powerline Extender
Ethernet Port
The extender has three 10/100/1000Mbps Ethernet ports. You can use them to connect
the extender to computers or broadband devices.
Reset
Use a pin to press and hold the Reset button for at least 5 seconds to reset the powerline
extender to factory default settings. All LEDs will turn off and start on again.
Note:
1. Plug the product directly into a wall socket but not a power strip.
Wall Outlet Power Strip
2. Please use the product in upward direction.
6