TP-Link TL-WPA8730 KIT Quick Start Manual

TL-WPA8730 KIT
Hello, I'm here.
Follow me to extend your Wi-Fi network.
Internet
WAN LAN
Find the Wi-Fi Info Card in the package, then relocate the powerline extender to a wall
outlet in the Wi-Fi "dead" zone. Connect to the Wi-Fi using the SSID and password on the
card.
* A red Powerline LED indicates poor signal strength, move the extender to another wall outlet.
Connect the adapter to a LAN
1
port of your router using an
Ethernet cable.
2 Plug the powerline adapter into a wall outlet, then plug the
powerline extender near it.
Powerline
Adapter TL-PA8010P
* Image may differ from
actual product.
Pair the powerline devices.
A. Press the Pair button for 1 second.
The Power LED starts blinking.
* If the Power LED does not blink, press it again.
Extender TL-WPA8730
B. Press the Pair button for 1 second.
The Power LED starts blinking.
When the Powerline LED is on
and stable, it's done.
Tips:
You can add more powerline devices to the
existing powerline network by pairing these
devices.