INVENTOR V5MFI-66 User & Installation Manual page 14

Air conditioning systems floor standing
Hide thumbs Also See for V5MFI-66:
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
7
LOCK
button:
Press and hold
response except pressing these two buttons again to disable locking.
Under lock mode, if you press any other button on the display panel, the lock symbol will ash
5 seconds at 1Hz. Under Lock mode , the remote control is available.
Air ow Direction Control
Horizontal Air ow Direction (AUTO)
The Left/Right(Horizontal Air ow) can be adjusted by using the remote control or unit control.
Press the"AUXILIARY FUNCTION" (FUNC.)button on the unit control panel, then press the ADJUST "
and "
" button to select the "
Repeat the above procedures to stop the swing operation.
Never adjust the vertical louvers by hand.
Vertical Air ow Direction (MANUAL) (some units)
The Up/Down(Verticall Air ow) air ow can be adjusted by horizontal louvers. Hold the edge of the
horizontal louver and move it up or down to set the desired air ow direction.
Vertical Air ow Direction(AUTO) (some units)
The Up/Down(Verticall Air ow) can be adjusted by using the remote control or unit control.
Press the"AUXILIARY FUNCTION" (FUNC. ) button on the unit control panel, then press the ADJUST
"
" and "
" button to select the "
up and down. Repeat the above procedures to stop the swing operation. When turn off the unit, the
horizontal louvers will automatically closed to prevent dust.
WARNING
Manually moving the horizontal and vertical air ow direction louvers could damage the
air conditioner(for the units with auto swing function).
NOTE:
The starting angle of the horizontal louver should not be too small, otherwise the narrow air outlet
will affect cooling or heating ef ciency.
Do not set the starting angle of the louvers too small during cooling or drying operation. Otherwise,
condensation may occur on the surface of the horizontal louver and cause dew dripping.
During the operation, if the louvers can not swing normally, shut off the unit and unplug for several
minutes, then plug it again and restart the operation.
The horizontal louver may slightly vibrate during the operation. This is normal.
Page 14
and
buttons together to activate lock feature, all buttons will not
" ,"
" or "
" (some models) feature and the horizontal louvers will swing
" feature and the louvers will swing left and right.
"

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V5MFI-66 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

V5mfo-66

Table of Contents