Advertisement
Quick Links
Advertisement
Related Manuals for advidia M-45-FW
Summary of Contents for advidia M-45-FW
- Page 1 M-45-FW Network Fixed Dome Cameras Quick Guide V1.01...
- Page 2 Waterproof Requirements Please waterproof cables in accordance with the following instructions. User shall assume all responsibility for device damage caused by water due to improper waterproof measures. NOTE! Before you start, connect all the needed cables and cut off the copper wires for the cables that you don't use.
- Page 3 Tighten Tighten Tighten Waterproof tape Wrap the unused cables together into a bundle 3. Install the supplied waterproof components to the network cable in sequence. CAUTION! You need to mount the rubber ring onto the network cable interface first. 4. If your camera has a DC cable and you will not use it, insert the plug into the interface.
-
Page 4: Packing List
Packing List Contact your local dealer if the package is damaged or incomplete. The attachments may vary with models, please see the actual model for details. Name Unit Camera Screw components （1） Mount accessory （2） User manual Remarks: * means optional and supplied with certain models only. (1)Including one or more accessories such as screws and hex key. - Page 5 When connecting to an external interface, use an existing connection terminal, and ensure that the cable terminal (latch or clamp) is in good condition and properly fastened. Ensure that the cable is not tense during mounting, with a proper margin reserved to avoid poor port contact or loosening caused by shock or shake.
-
Page 6: Mount Your Camera
4.0mm 60.8mm 2.4" 0.2" 100.0mm 3.9" 108.6mm 4.3" Cable Connection The appearance and tail cable may vary with device model. Power Network interface interface 1. AUDIO_OUT 2. GND 3. AUDIO_IN 4. GND 5. ALARM_IMPUT 6. GND 7. ALARM_OUTPUT_P 8. ALARM_OUTPUT_N Mount Your Camera The following part takes ceiling mount as an example. - Page 7 Drill holes on the wall. Use a Ø6-6.5mm drill bit to drill 30 mm-depth guide holes according to the positions marked by stickers. Mount the plastic rivets of self-tapping screws. Knock the plastic rivets into the guide holes and ensure that they are tightened up. Mount the camera.
- Page 8 Adjust the monitoring direction of the lens. Tighten the screws after vertically adjusting the len. Lens base Rotate the lens base horizontally. Fastening screw Loosen the fastening screws and rotate the lens vertically. Lens Rotate the lens horizontally. Mount the transparent dome housing. Align the screw holes in the base, and tighten the three star shape screws on the edge of the transparent dome housing to fix it.
-
Page 9: Access Your Camera
NOTE! The above process is concealed installation, tail cables are led out from the top of camera. Cables are frapped to prevent messy cables from affecting camera mounting. If open installation is adopted, tail cables are led out from the side groove of the camera. - Page 10 NOTE! DHCP is enabled by default. If a DHCP server is used in your network, your camera may be assigned an IP address, and you need to use the assigned IP address to log in. You may need to install a plug-in at your first login. Please follow the on-screen instructions to complete the installation and then open the browser again to log in.
- Page 11 Disclaimer and Safety Warnings Copyright Statement No part of this manual may be copied, reproduced, translated or distributed in any form by any means without prior content in writing from our company (referred to as us hereafter). The product described in this manual may contain proprietary software owned by our company and its possible licensors.
- Page 12 and recommendations in this manual are presented without warranty of any kind, expressed or implied, including, but not limited to, merchantability, satisfaction with quality, fitness for a particular purpose, and noninfringement. l Users must assume total responsibility and all risks for connecting the product to the Internet, including, but not limited to, network attack, hacking, and virus.
- Page 13 l Choose username and password discretely: Avoid using the username and password of your social media, bank, email account, etc, as the username and password of your device, in case your social media, bank and email account information is leaked. l Restrict user permissions: If more than one user needs access to your system, make sure each user is granted only the necessary permissions.
- Page 14 l Use a UL certified power supply that meets LPS requirements if an adapter is used. l Use the recommended cordset (power cord) in accordance with the specified ratings. l Only use the power adapter supplied with your device. l Use a mains socket outlet with a protective earthing (grounding) connection. l Ground your device properly if the device is intended to be grounded.
- Page 15 to cause harmful interference in which case the user will be required to correct the interference at his own expense. LVD/EMC Directive This product complies with the European Low Voltage Directive 2014/35/EU and EMC Directive 2014/30/EU. WEEE Directive–2012/19/EU The product this manual refers to is covered by the Waste Electrical & Electronic Equipment (WEEE) Directive and must be disposed of in a responsible manner.