Figure 30: Dip Switch; Table 17: Operation Mode Setting - WAGO 750-325 Manual

WAGO-I/O-SYSTEM 750
750-325 CC-Link Fieldbus Coupler
4.4.3 DIP Switch
The DIP switch on the fieldbus coupler is used to parameterize the fieldbus
coupler.

Figure 30: DIP Switch

The 8-pole DIP switch is used to set
• the operation mode
• the extended cyclic setting for multiple cycles
• the number of occupied stations
• the baud rate
Pin
8
6/7
4/5
1/2/3
default setting
*)
4.4.3.1 Operation Mode
The pin 8 of the DIP switch determines the operation mode of the fieldbus
coupler.

Table 17: Operation Mode Setting

Pin Value
8 0
1
*)
default setting
*)
Function
Operation mode:
CC-Link V2.0 /V1.1
*)
Extended cyclic setting with number of cycles:
1/2/4 *) /8
Number of occupied stations:
1/2/3/4
*)
Baud rate:
156 kBaud / 625 kBaud / 2.5 MBaud / 5 MBaud / 10 MBaud
Setting
CC-Link V 1.1
CC-Link V 2.0
Device Description
*)
Manual
Version 2.0.1
51