Figure 22: Examples Of The Wago Shield Connecting System; Figure 23: Application Of The Wago Shield Connecting System - WAGO 750-325 Manual

42 System Description
3.7.3 Shielded Signal Lines
Use shielded signal lines!
Always use shielded signal lines for analog signals and I/O modules which are
equipped with shield clamps. Only then you can ensure that the accuracy and
interference immunity specified for the respective I/O module can be achieved
even in the presence of interference acting on the signal cable.
On some WAGO devices you can directly clamp the shield. For all other devices
use the WAGO shield connecting system.
3.7.4 WAGO Shield Connecting System
The series 790 WAGO shield connecting system consists of shield clamping
saddles, busbars and various mounting carriers. These components can be used
to achieve many different configurations.

Figure 22: Examples of the WAGO Shield Connecting System

Figure 23: Application of the WAGO Shield Connecting System

Manual
Version 2.0.1
WAGO-I/O-SYSTEM 750
750-325 CC-Link Fieldbus Coupler