Figure 37: Example For The Arrangement Of Power Contacts - WAGO 750-325 Manual

WAGO-I/O-SYSTEM 750
750-325 CC-Link Fieldbus Coupler
6.2 Power Contacts/Field Supply
Risk of injury due to sharp-edged blade contacts!
The blade contacts are sharp-edged. Handle the I/O module carefully to prevent
injury. Do not touch the blade contacts.
Self-cleaning power jumper contacts used to supply the field side are located on
the right side of most of the fieldbus couplers/controllers and on some of the I/O
modules. These contacts come as touch-proof spring contacts. As fitting
counterparts the I/O modules have male contacts on the left side.

Figure 37: Example for the Arrangement of Power Contacts

Field bus node configuration and test via smartDESIGNER
With the WAGO ProServe
structure of a fieldbus node. You can test the configuration via the integrated
accuracy check.
® Software smartDESIGNER, you can configure the
Connect Devices 69
Manual
Version 2.0.1