Advertisement
7. Network Configuration & Adding IP Cameras
►LAN
1 Set the network of the DVR. Go to Start → Settings → Network →TCP/IPv4. Input IP address, subnet mask,
gateway, etc. If using DHCP, please enable DHCP in both the DVR and the router.
2 Go to Start → Settings → Network → Port. Input HTTP port (the default value is 80), server port (the default port is
6036).
3 Click "Apply" to save the settings.
4 Go to Start → Settings → Camera → Add Camera. The DVR will automatically refresh the cameras searched. The
IPC which supports Onvif protocol may be added manually. If the IPC searched is not in the same local network as
the DVR, you should select the device and click
Quickly A d d
No.
1
Selected: 1/1
Rem ain Ban d w id t h : 10 / 10 M b
5 Highlight the device you want to add and then click "Add" button. The DVR will automatically refresh the cameras
and return to "Edit Camera" interface. "Online" status means connecting the device successfully and you will see
the live image. You may select the added device and click
Signal Access Set
No.
Camera Name
1
IP Camera 1
2
[A01]Camera1
3
[A02]Camera2
4
[A03]Camera3
5
[A04]Camera4
►WAN
1 Set the network of the DVR. Go to Start → Settings → Network → TCP/IPv4. Input static IP address or enable
PPPoE and then input the user name and password received from your ISP.
2 Go to Start → Settings → Camera. Click "Add Camera" and select "Manually Add" to add IP cameras. Input IP
address, server port, username and password of the IP camera. The IP camera must be connected over WAN.
And here the IP address of the IP camera must be a WAN IP address.
8. UPnP
You can use the UPnP function to enable a fast connection of the device to
WAN via a router without port mapping.
1
Go to Start → Settings → Network → UPnP, and enable UPnP and then
click "Apply" button to save.
2
Enable the UPnP function in the router.
3
Click "Refresh" button to refresh the UPnP status. If the UPnP status is still
"Invalid UPnP" after refreshing it several times, the port would be wrong.
Please change the mapping type to "Manual" and then click
the port until the UPnP status turns to "valid UPnP".
TCP/IPv4
IP Address Settings
Et h ern et Po r t 1 ( O n lin e )
Obtain an IP address automatically
IP Address
Subnet Mask
Gateway
Obatin DNS server address automatically
Preferred DNS
Alternate DNS
Ad d Cam er a
M anually A d d
Port
Edit
Subnet Mask
IP Address
192.168.2.45
80
255.255.255.0
Default Password
Edit Camera
Edit Camera Group
IP Address
Protocol
Model
Port
Status
192.168.1.45
80
Online
XXX
XXX
Port
DDNS
E-mail
UPnP
NAT
Network Status
192 . 168 .
1 .
2
0
.
0
.
0 .
0
192 . 168 .
1 .
1
192 . 168 .
1 .
1
0
.
0
.
0 .
0
to modify the IP address.
Protocol
Model
Version
XXX
XXX
4.0.0.1.beta1
Add
Cancel
to modify channel, IP address, ect.
Search Camera
Preview
Edit
Delete
to modify
Edit IP
Mac Address
CE :98 :23 :75 :35 :22
IP Address
192 .168 . 1 . 45
Subnet Mask
255 . 255 . 255 . 0
192 .168 . 1 . 1
Gateway
Username
admin
Password
OK
Cancel
Edit Camera
IP Camera 1
Camera Name
IP Address
192 .168 . 1 . 58
Port
80
Protocol
XXX
Model
XXX
Username
admin
Password
Display Password
Test
OK
Cancel
TCP/ IPv4
Port
DDNS
E-mail
UPnP
UPnP
Enable
Map Type
Auto
External Port
External Address
Port Type
HTTP Port
80
183.17.254.19
6036
Server Port
183.17.254.19
RTSP Port
554
NAT
Network Status
Port
UPnP Status
Edit
80
Valid UPnP
6036
Valid UPnP
554
Invalid UPnP
Refresh
Apply
Advertisement
