Remote Code; Hide Mode; Software Update - JVC BLUEscent DLA-VS47NV Instructions Manual

Glossary of Network Terminology
DHCP
IP Address
Subnet Mask
Default Gateway
MAC Address

Remote Code

For changing the remote control code.
Setting
A
B
You need to configure the remote control according to the settings of this unit.
0
On the remote control unit, press the [MENU] and [BACK] buttons at the same time for three seconds or longer to
switch the code.
The backlight of the remote control blinks 3 times: change the remote control code to "A"
0
The backlight of the remote control blinks 2 times: change the remote control code to "B"
0
If the setting differs between this unit and the remote control, the "STANDBY/ON" indicator blinks in green when
0
receiving the remote control code.
WARNING LIGHT STANDBY/ON ANDBY/O
(Green)

Hide Mode

For reducing the power consumption by turning off the laser light source when the [HIDE] button is pressed to hide the
image temporarily.
Setting
Off
On

Software Update

For performing a software update.
For the latest information on the software, refer to https://www3.jvckenwood.com/english/download/.
46
: Abbreviation for Dynamic Host Configuration Protocol. This is a protocol for the network
to assign an IP address automatically to the connected device.
: Numeric characters for identifying the device that is connected to the network.
: Numeric characters that define the bit count used for the network address that is a
segment of the IP address.
: Server for communicating beyond the network that is divided by the subnet mask.
: Abbreviation for Media Access Control address. This is a number that is unique to each
network adapter. Each of the network adapters is assigned with a unique MAC address.
Change the remote control code from "B" to "A".
Change the remote control code from "A" to "B".
Do not suppress the current supply when the [HIDE] button is pressed to hide the
image temporarily.
Reduces the power consumption by turning off the laser light source when the
[HIDE] button is pressed to hide the image temporarily.
Description
Description