I Display Mode; E-Shift Polarity V; Ir Enhance Mode - JVC BLUEscent DLA-VS47NV Instructions Manual

Display Mode
For managing the e-shift status v and the lighting condition of the light sources.
Setting
Normal
NV
e-shift v
NV(e-shift) v
NV(FS)
NV(e-shift FS) v
3D
The selectable "Display Mode" settings vary according to input signal.
0
List of selectable "Display Mode" according to input signal
Single (DP1-DP4)
Dual - stripes
Quad - stripes
Quad - cross
Dual - stripes
Quad - stripes
Quad - cross
Dual - frame sequential
Quad - frame sequential
No signal
Out of range

e-shift polarity v

For switching the polarity of e-shift.
Setting
Positive
Negative
This function cannot be used except when "Display Mode" is set to "e-shift", "NV(e-shift)", "NV(e-shift FS)" or "3D".
0

IR Enhance Mode

For switching the function to support the power of the IR light source.
Setting
Off
On
32
Only the laser light source lights up.
Only the IR light source lights up.
This is the mode for displaying e-shift. Only the laser light source lights up.
This is the mode for displaying e-shift. Only the IR light source lights up.
The laser light source and IR light source light up alternately frame by frame.
This is the mode for displaying e-shift. The laser light source and IR light source
light up alternately frame by frame.
This is the mode for displaying 3D videos.
Input Signal
24, 25, 30, 50, 60 Hz
50, 60 Hz
60 Hz
120 Hz
50 Hz, 60 Hz
60 Hz
Activates e-shift using positive polarity signal.
Activates e-shift using negative polarity signal.
Disables the support function.
Enables the support function.
Description
Display Mode
Normal / NV
Normal / NV / e-shift v /
NV(e-shift) v / 3D
Normal / NV / e-shift v /
NV(e-shift) v / NV(FS) /
NV(e-shift FS) v / 3D
Normal / e-shift v
Normal
Description
Description