Display Setup; Led Indication; High Altitude Mode; Nv Menu Display - JVC BLUEscent DLA-VS47NV Instructions Manual

LED Indication

When "LED Indication" is set to "Off", the LED indicator does not light up or blink under the following status.
When the time to replace the laser light source or IR light source is near. (P. 47)
0
When HIDE is on. (P. 69)
0
When the projector receives a signal from a remote control which is set to a different code mode (A or B). (P. 46)
0

High Altitude Mode

For setting the high altitude mode to "On" or "Off".
Set to "On" when using the projector at a location of low atmospheric pressure (higher than 900 m above sea level).

Display Setup

Back Color

For setting the color of the background to "Blue" or "Black" when there is no signal input.

Menu Position

For setting the display position of the menu.

Signal Display

For setting the display of the input information to "On" or "Off".
Setting
Off
On

Logo

For setting the display of logo during startup to "On" or "Off".
Setting
Off
On

NV Menu Display

For turning on the laser light source when displaying the menu when the projector is configured to project only with the
IR light source (*).
Does not function except when "Display Mode" is set to "NV" or "NV(e-shift)" and "IR Enhance Mode" is set to "Off".
0
* "Display Mode" is set to "NV" or "NV(e-shift)" and "IR Enhance Mode" is set to "Off".
Setting
Off
On
44
Not displayed.
Shows the input terminal for 5 seconds when input is switched.
Not displayed.
Displays the "D-ILA" logo for 5 seconds during startup.
Turns off the laser light source when displaying the menu.
Turns on the laser light source when displaying the menu.
Description
Description
Description