Function; I Sync Out; Off Timer; Network - JVC BLUEscent DLA-VS47NV Instructions Manual

Function

Sync Out
For selecting the type of signal to output from Sync Out.
Setting
Input (Positive)
Input (Negative)
Low
High
FEDSC
*1 Outputs the e-shift driving waveform if "e-shift" is set to "On(Positive)", "On(Negative)" or "On(FEDEC)".
*2 Does not function when "Display Mode" is set to "NV(FS)".
3D sync signal is output during 3D signal input regardless of this setting.
0
Output signal varies as follows according to the format of the 3D signal.
Input Signal
Dual, Quad (frame sequential)
Dual, Quad (stripes)
Polarity switches to the setting in "3D Setting" " "Polarity".

Off Timer

For setting the duration before the power turns off automatically when the projector is not operated.
Setting values: "Off", "1 Hour", "2 Hours", "3 Hours" and "4 Hours"
0
* The setting will be retained even after the Off Timer operation has completed.

Network

For specifying the settings for external control from a PC or smartphone.
Setting
DHCP Client On
Off
IP Address
Subnet Mask
Default Gateway
MAC Address
Set
Outputs a signal that is synchronized with the vertical sync signal of the input video
signal. (*1)
Outputs a signal with reversed polarity that is synchronized with the vertical sync
signal of the input video signal. (*1)
Fixes the output at Low.(*2)
Fixes the output at High.(*2)
Outputs a signal that is synchronized with the polarity information included in the
FEDSC packet. Outputs a Low when there is no FEDSC packet.
Outputs a signal that is synchronized with the input video signal.
Outputs a signal that is synchronized with the polarity information
included in the FEDSC packet.
Obtains the IP address automatically from the DHCP server inside the connected
network.
For configuring the network settings manually.
For configuring the IP address.
For configuring the subnet mask.
For configuring the default gateway.
Displays the MAC address of the unit.
Applies the network settings.
Description
Output Signal
Description
45