Display Setup; Keystone; Pincushion; Back Color - JVC DLA-RS3000 Instructions Manual

Keystone

For correcting any keystone distortion that occurs when the projector is installed at an angle with respect to the screen.
Vertical setting range: -16 to +16
0
* Increasing the value changes the aspect slightly.
* This function cannot be used if "Pincushion" is set.
-16

Pincushion

Corrects the geometric distortion that occurs when projecting on a curved screen.
Setting range: 0 to 16
0
* When using the projector with the lens shifted in the vertical direction, the amount of distortion at the upper and lower
ends may be different and the curvature distortion may not be fully corrected.
* This function cannot be used if "Keystone" is set.
0
Aspect
The screen size of the projected image can be adjusted optimally according to the original screen size (aspect) that
has been input.
Æ "Adjusting the Screen Size (Aspect)" (P. 26)

Display Setup

Back Color

For setting the color of the background to "Blue" or "Black" when there is no signal input.

Menu Position

For setting the display position of the menu.

Signal Display

For setting the display of the input information to "On" or "Off".
Setting
Off
On
60
0
Not displayed.
Shows the input terminal for 5 seconds when input is switched.
Description
16
16