Connecting A Light Sensor; Light Sensor Connection When Using The Supplied Frame - RADEMACHER Troll Basic 5602 Instruction Manual

i

11. Connecting a light sensor*

If you intend to operate your Troll Basic 5602 and the connected
tubular motor according to brightness levels, then you must
connect the optionally available RADEMACHER light sensor to
the Troll Basic 5602.
11.1 Light sensor connection when using the
i
1.
Carefully pull the operating unit off the installation housing.
2.
Insert the light sensor plug into the socket on the rear of the
operating unit.
* Accessories, see page 52
30
supplied frame
EN