Intended Use; Incorrect Use - RADEMACHER Troll Basic 5602 Instruction Manual

i

3.1 Intended Use

Only use the Troll Basic 5602 for connecting and controlling
a tubular motor for:
◆ Roller Shutters
◆ Awnings
Operating conditions
◆ Only operate the Troll Basic 5602 in dry rooms.
◆ A 230 V / 50 Hz power supply, together with a site-provided
disconnecting device (fuse), must be available at the
installation location.
◆ The tubular motor must be fitted with a mechanical or
electronic end position switch.
i

3.2 Incorrect Use

Using the Troll Basic 5602 for any other purpose than previously
mentioned is not permissible.
Improper use can lead to serious injuries or property
damage.
◆ The Troll Basic 5602 is not suitable to be used for an electrically
safe disconnection of the connected appliances.
There is a risk to life caused through short circuiting and
electric shocks if the troll Basic 5602 is used outside or in
damp rooms.
◆ Do not install and use the Troll Basic 5602 outdoors or in
damp rooms.
8
EN