RADEMACHER Troll Basic 5602 Instruction Manual page 25

i
9. Safety Instructions for the Electrical Connection
Using incorrect installation housing can lead to personal
injury and damage to property (electric shocks / short
circuiting).
◆ Only use the provided installation housing to connect and
mount the Troll Basic 5602.
◆ Installation housings of other RADEMACHER products are
not compatible.
Incorrect wiring may lead to short-circuits and destroy the
device.
Follow the pin assignment detailed in the wiring diagram.
Connection of a second phase to E1 or E2 will cause the
Troll Basic 5602 to be damaged.
◆ When the inputs [E1 / E2] are used, the external push-
button / controller and the Troll Basic 5602 must be
connected to the same phase [ L ].
◆ If another phase [ L' ] is connected, the incorrect mains
voltage (380 V / 50 Hz) will be applied to the inputs and
damage the Troll Basic 5602.
WARNING! WARNING!
WARNING! WARNING!
EN
25