KROHNE OPTISWITCH 5100 C Operating Instructions Manual

KROHNE OPTISWITCH 5100 C Operating Instructions Manual

Electronics module
Hide thumbs Also See for OPTISWITCH 5100 C:

Advertisement

Quick Links

Operating Instructions
Electronics module
OPTISWITCH 5100 C, 5200 C

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OPTISWITCH 5100 C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for KROHNE OPTISWITCH 5100 C

  • Page 1 Operating Instructions Electronics module OPTISWITCH 5100 C, 5200 C...
  • Page 2: Table Of Contents

    7.2 Disposal ......13 8 Supplement 8.1 Technical data ..... 14 Electronics module - OPTISWITCH 5100 C, 5200 C...
  • Page 3: About This Document

    Ex applications This symbol indicates special instructions for Ex ap- plications. List The dot set in front indicates a list with no implied sequence. à Action This arrow indicates a single action. Electronics module - OPTISWITCH 5100 C, 5200 C...
  • Page 4 About this document Sequence Numbers set in front indicate successive steps in a procedure. Electronics module - OPTISWITCH 5100 C, 5200 C...
  • Page 5: For Your Safety

    2.3 Safety information for Ex areas Please note the Ex-specific safety information for installation and operation in Ex areas. These safety instructions are part of the operating instructions manual and come with the Ex-approved instruments. Electronics module - OPTISWITCH 5100 C, 5200 C...
  • Page 6: Product Description

    3 Product description 3.1 Configuration The scope of delivery encompasses: Scope of delivery Oscillator for OPTISWITCH 5100 C and 5200 C (SW Documentation - this operating instructions manual 3.2 Principle of operation Oscillator SW 60 is suitable for replacement of...
  • Page 7: Mounting

    2 Unscrew the housing cover 3 Lift the opening levers of the terminals with a screwdriver 4 Pull the connection cables out of the terminals 5 Loosen the two screws with a Phillips screwdriver (size 1) Electronics module - OPTISWITCH 5100 C, 5200 C...
  • Page 8 12 Close the opening levers of the terminals, you will hear the terminal spring closing 13 Check the hold of the wires in the terminals by lightly pulling on them Electronics module - OPTISWITCH 5100 C, 5200 C...
  • Page 9 15 Screw the housing cover back on The electronics exchange is finished. As a rule, the exchange of the oscillator must be documented internally when used in Ex applications. Electronics module - OPTISWITCH 5100 C, 5200 C...
  • Page 10: Setup

    The necessary, suitable operating instructions manual can be downloaded from our homepage under Down- loads. The adjustment should be carried out acc. to the description in the operating instructions manual. Electronics module - OPTISWITCH 5100 C, 5200 C...
  • Page 11: Maintenance

    Print and fill out one form per instrument Clean the instrument and pack it damage-proof Attach the completed form and possibly also a safety data sheet to the instrument Electronics module - OPTISWITCH 5100 C, 5200 C...
  • Page 12: Dismounting

    Mark the instrument as scrap and dispose of it according to government regulations (electronic scrap ordinance, ...) Materials: see Technical data If you cannot dispose of the instrument properly, please contact us about disposal methods or return. Electronics module - OPTISWITCH 5100 C, 5200 C...
  • Page 13: Supplement

    Supplement 8 Supplement 8.1 Technical data Technical data are stated in the operating instructions manual of the appropriate sensor. Electronics module - OPTISWITCH 5100 C, 5200 C...
  • Page 14 Electronics module - OPTISWITCH 5100 C, 5200 C...
  • Page 15 Electronics module - OPTISWITCH 5100 C, 5200 C...
  • Page 16 Subject to change without notice 30492-EN-050211...

This manual is also suitable for:

Optiswitch 5200 c

Table of Contents