Table of Contents
Advertisement
96
Maintenance Section
Crankcase Breather (Canister) - Replace
Illustration 63
Typical example
4. Remove filter element (5) and remove O ring seal
(6) and discard.
Note: Ensure that all parts are clean and free from
dirt and damage.
5. Apply clean engine oil to new O-ring seal (6).
Install the O-ring seal onto cap (2).
6. Install a new filter element (5) into cap (2).
7. Install cap assembly into the main body (1).
Tighten the cap assembly to 10 N·m (7 lb ft).
g03331704
Illustration 64
8. Install hose (4) and clip (3). Ensure that the hose is
correctly orientated.
If a new hose is being installed, the end of the
hose with the white band in Position (X) must be
attached to the breather canister. Refer to
Illustration 64 for the correct positioning.
Note: Incorrectly installing the hose can cause
catastrophic engine failure.
9. Remove the container and clean away any split
fluid.
M0094137-02
g06477300
Hide quick links:
Advertisement
Chapters
Table of Contents
