Table of Contents
Advertisement
8. Projector Configuration
8.1.
Projector 3D File Configuration
The projector's 3D control file must be configured to work with the MI-HORIZON3D. These
procedures describe configuring the control files for Series II projectors.
The Dark Time should be set to 350µS with the Delay being set to -100µS. These figures are
applicable to all frame rates and projector flash configurations.
Follow the instructions for the appropriate projector.
8.2.
Series II Projectors
Configure the projector settings as shown in the graphics below for NEC, Christie, and Barco
Projectors.
8.2.1. NEC Series II File Settings for External Server
Playback
Installation & Operation Manual | MI-HORIZON3D
NEC
© MASTERIMAGE 3D, Inc.
24
Advertisement
Table of Contents
Need help?
Do you have a question about the MI-HORIZON3D and is the answer not in the manual?