Minuteman ER26 Service Manual page 31

7.2 Squeegee Caster Adjustment
Clearance between support roller and floor with unfolded sealing strip (Factory
presetting): 3 mm ±0.5 (Fig. 5/2).
Place additional 1mm spacers between the angle and the fixed roller housing to increase
clearance or remove existing 1mm spacer from between the angle and the fixed roller
housing in order to reduce the clearance. Re-insert the spacers removed from between
the angle and the fixed roller housing again above the fixed roller housing to allow
complete tightening of the screws.
3mm
±
0.118 in
0.5
± .02
Page 31