Minuteman ER26 Service Manual page 14

4.1 Brush Pressure Settings
Brush Pressure Settings
The brush pressure range can be The brush pressure range can be
changed when changing the type of changed when changing the type of
deck on the ER2832 models. deck on the ER2832 models.
Connect the orange/violet wire into Connect the orange/violet wire into
the terminal block with red/black wire the terminal block with red/black wire
group for cylindrical decks and group for cylindrical decks and
unplug it for the disk decks. unplug it for the disk decks.
The terminal block is located below The terminal block is located below
the Trio controller on the ER2832s. the Trio controller on the ER2832s.
ER2832 Shown
Page 14