Side Squeegee Adjustment (Cylindrical) - Minuteman ER26 Service Manual

6. Side Squeegee Adjustment
The side squeegees on the The side squeegees on the
cylindrical decks can be cylindrical decks can be
adjusted by loosening the two adjusted by loosening the two
black knobs and moving the black knobs and moving the
squeegee assemble up or squeegee assemble up or
down. down.
The brush assembly may be The brush assembly may be
accessed by removing the accessed by removing the
yellow knob C. The squeegee yellow knob C. The squeegee
assembly is hinged at D. assembly is hinged at D.
Remove the three wing nuts Remove the three wing nuts
that mount the brush idler that mount the brush idler
bearing assembly E and bearing assembly E and
remove the brush roll. remove the brush roll.
Repeat the process on both Repeat the process on both
sides of the machines sides of the machines
ER26, ER2832, SCV2426 & SCV2832E Only
Cylindrical Decks
A-Side Squeegee
B-Black Adjustment Knob
C-Yellow Brush Access Knob
D-Side Squeegee Hinge
E-Bush Access Plate
B
Page 27
E