Minuteman ER26 Service Manual page 10

3. Service Mode
The Service mode switch can be used to lower the brush deck.
Press and hold the switch in the down position and the deck will lower. Once
it is in service mode, the deck can raised and lowered by pressing the top or
lower part of the rocker switch. To return the machine back to normal
operation: Turn the key switch off and back on. The machine will reset.
The switch located below the
seat behind the panel on the
right side on the SCV2832E
and ER2832 s.
The switch is located
behind the panel on the
left side on the ER26.
The switch is located below the
recovery tank on the ES2832
and CP2832 models.
Page 10