Error Codes (Led) - Minuteman ER26 Service Manual

5. Error Codes
The model SC280000 Rider scrubber uses a LCD display mounted above the steering wheel which
indicates the error code when they occur. The will be displayed as a four digit code with a picture of
a wrench next it. The top three are the hour meters for Total Time, Brush Motors and Drive Motor.
The ER26, ER2832, SC2832E, SC2426P, ES2862 and CP2832 models uses a 10 light LED display to
indicate the battery condition and error codes. The battery condition will be displayed with 1 to 10
LEDS. 10 LEDs would be a fully charged battery one LED batteries are discharged.
When a error occurs 1 to 10 LEDS will flash indicating a specific error has occurred. There are two
aspects of the error codes.
A. How many LEDS are flashing
B. How many times it is flashing ( referred to as sequence)
Page 18